When was the final time the roof of one’s building was inspected? If it’s been awhile, the roof could have problems lurking that require immediate attention. Some roof problems cause obvious signs such as leaks, while others produce subtle signs that are only detectable at first glance. In either case, leaving the problems unaddressed can cost you a small fortune once you finally repair them. If the roof on your own building has the problems listed below, an organization that specializes in commercial roofing should repair them quickly:
Buckled Panels
Roof panels buckle due to weather damage and poor installation. Regardless of the cause, the buckling allows wind to blow within the panels, making them loose. As the problem worsens, the panels start to fall off, often coming off in large sections when a storm hits. Buckled panels are probably one of the most commonly fixed problems by companies that perform roof repair.
Expended Screw Holes
Expanded screw holes are another problem for panel roofs. As time passes, wind and fluctuating temperatures cause the screw holes in panels to widen around the screws that hold the panels set up. This creates an area where water can leak underneath the panels and soak the roof deck. Once the deck becomes saturated, the thing is costly to fix.
Blistering
Improper heating procedures and dry lapping cause hot bituminous roof systems to blister. Although small blisters seldom pose an issue, large ones can rupture and invite water to seep beneath the bitumen. After the blisters form, warm weather typically makes them worse. Due to the humid subtropical climate in a few regions of the country, commercial roofing frequently experiences blistering.
Ponding Water
Blocked drains and improper sloping could cause water to assemble in small ponds on a roof. Repairing a blocked drain is easy, but fixing a sloping problem is more complex. Often, installing a taper insulation system to determine a new slope is a good solution. During the rainy season, resolving ponding water is one of the most common forms of roof repair.
Loose Flashing
Flashing prevents water from seeping in the crevice where the roof abuts to protrusions such as for example chimneys and vents. Over time, most flashing should be resealed. If Soft wash roof cleaning near me is not, leaks may cause serious damage the deck and building interior. Most flashing problems are corrected during the course of scheduled maintenance.
Missing Mortar
Chimneys and high parts of brick walls that have sections of missing mortar may cause leaks. These leaks are often mistaken for leaks in the roof membrane, but an intensive inspection by a company that focuses on commercial roofing will reveal the real problem. Most parts of missing mortar could be repaired with basic tuck pointing procedures.
Conclusion
The problems above are some of the most common reasons for roof repair. When they are corrected early, most problems are cheap to fix, but not addressing them until they cause serious problems may necessitate roof replacement. Having a scheduled maintenance agreement with a roofing company is the best solution to ensure problems are detected early.
Categories:
No Responses